Skip to main content

Grease Trap Regulations: A National Overview for U.S. Food Service Operators

8 Mar 2026 · Updated 7 min read No comments FOG Compliance
Featured image
FOG Compliance Guide · 2026

Grease Trap Regulations:
A National Overview

How federal pretreatment rules, state or provincial rules, and local FOG ordinances fit together — and what they mean for your kitchen.

Guides for 44 US states and 10 provinces Sources linked throughout Updated October 2026
FOG ordinances vary significantly by municipality. This guide covers the national framework — always verify requirements with your local water authority or FOG program manager. Use the FOG Compliance Checklist →

Want prices from local grease trap contractors?

Tell us what you need. We review every request and may look for up to 3 available contractors within 75 miles. A match or response is not guaranteed.

Get local quotes →

The Pretreatment Program Backbone

In the United States, FOG control sits inside the broader National Pretreatment Program codified at 40 CFR Part 403. EPA sets the baseline rules, but day-to-day enforcement usually sits with local Publicly Owned Treatment Works (POTWs) — the municipal sewer authorities that receive the discharge. In Canada, check the provincial or territorial and municipal rules that apply.

In the United States, 40 CFR §403.5 prohibits discharges that cause Pass Through or Interference, as those terms are defined in Part 403. Paragraph (b)(3) specifically prohibits "solid or viscous pollutants in amounts which will cause obstruction to the flow in the POTW resulting in Interference." Congealed FOG can obstruct flow in this way. The specific grease rules — interceptor size, cleaning frequency, permits, records and fines — are set by local ordinances, sometimes alongside state rules.

Under 40 CFR §403.8, treatment works that meet the conditions in that section must develop and enforce a local pretreatment program, with legal authority to inspect and to seek penalties. EPA's food-service FOG fact sheet notes that a growing number of these programs use that authority to set FOG controls for food service establishments. See the EPA National Pretreatment Program for program guidance.

47% of blockage events with a reported cause were attributed to grease in the sewer-overflow data analyzed for the EPA 2004 Report to Congress on CSOs and SSOs (Figure 4.11)
25% is a service trigger used by many local programs, such as Seattle and Connecticut (outdoor in-ground interceptors). It is not a federal rule.
$68,445/day maximum federal civil penalty per day per violation in Clean Water Act court cases under 33 USC §1319(d), as adjusted for inflation in 40 CFR §19.4 (penalties assessed on or after January 8, 2025)
3 years minimum federal retention for monitoring records kept by industrial users subject to pretreatment reporting, under 40 CFR §403.12(o)(2). Local FOG programs set their own record rules.

Five Starting Points, With Sources

Federal Prohibition on Obstruction Discharge
In the United States, discharging "solid or viscous pollutants in amounts which will cause obstruction to the flow in the POTW resulting in Interference" is prohibited under 40 CFR §403.5(b)(3). Congealed FOG can cause this kind of obstruction.
40 CFR §403.5(b)(3)
POTW Pretreatment Authority
US treatment works that meet the conditions in 40 CFR §403.8 must develop and enforce a local pretreatment program with inspection and penalty authority. In Canada, check the provincial or territorial and municipal rules that apply.
40 CFR §403.8
Record Keeping
For grease-trap service records, check your local rules; retention periods vary. Chandler, Arizona requires food service establishments to keep records on site for three years, while Connecticut's general permit requires five. Separately, industrial users subject to federal pretreatment reporting must keep monitoring records for at least 3 years under 40 CFR §403.12(o)(2).
Local rules + 40 CFR §403.12(o)
Interceptor Sizing Follows Your Plumbing Code
Sizing depends on the plumbing code your area has adopted and any local amendments. In the US that is often a version of the Uniform Plumbing Code (grease interceptors are in Section 1014) or the International Plumbing Code (Section 1003.3), which refers to standards such as ASME A112.14.3 and PDI G101 for hydromechanical units. In Canada, check the provincial plumbing code and your municipal sewer bylaw. Confirm the code edition and sizing rules with your local plumbing authority.
Your adopted plumbing code
The 25% Trigger (Local, Not Federal)
Many local programs use a 25% trigger, but what is measured, which devices it covers and how it is enforced vary. Seattle limits food and FOG buildup to 25% of an interceptor when manufacturer specifications are not available, and Connecticut's general permit, for outdoor in-ground interceptors, uses 25% of operating depth or service every three months, whichever comes first.
Seattle + Connecticut examples

Selected City Programs

Local programs vary widely on cleaning cadence, statute structure, and penalty ceilings. Below are five jurisdictions chosen to illustrate that variation. For the full set of state and provincial pages we cover, jump to the By State directory.

City Authority & Statute Cleaning Frequency Max Penalty
Chicago, IL City of Chicago (Municipal Code Chapter 11-16, public sewers) and the Metropolitan Water Reclamation District of Greater Chicago (MWRD), which serves Chicago and 128 suburban communities in Cook County. Not set on this page — check with the City of Chicago and MWRD. Unless Chapter 11-16 provides otherwise, $500 to $1,000 per offense for violations of the city's public-sewer chapter (Municipal Code §11-16-270).
New York City, NY NYC Department of Environmental Protection; grease interceptor rules in 15 RCNY §19-11. As often as needed so the interceptor does not exceed its rated capacity (NYC DEP). Up to $10,000 per day, per violation (NYC DEP).
Cheyenne, WY Cheyenne BOPU Industrial Pretreatment Program; Cheyenne City Code 13.20.545. Every 90 days or at a frequency the Board of Public Utilities specifies; cleaning manifests go to the program within 14 days of each service. Not listed on the BOPU FOG page — check Cheyenne City Code.
Toronto, ON City of Toronto / Toronto Water — Toronto Municipal Code Chapter 681 (Sewers By-law). Hydromechanical: every four weeks, before grease and solids reach 25% of liquid volume, or before rated capacity is exceeded, whichever happens first; the City may approve up to eight weeks. Gravity: pump out before fats, oil, grease and solids exceed 25% of liquid volume (Toronto code of practice). Individual: up to CAD $50,000 for a first offence; after that up to $75,000, or $100,000 for breaches of §§681-2 to 681-4. Corporation: up to $100,000 per offence. Continuing offence: up to $10,000 per day. A special fine equal to any economic gain may also apply (§681-14.1).
Montréal, QC Communauté métropolitaine de Montréal — Règlement 2008-47 sur l'assainissement des eaux, enforced by member municipalities. Restaurants must send grease-bearing water through a grease trap that is installed, used and maintained correctly (art. 4 b). Confirm maintenance schedules with your municipality. First offence: fine of $1,000 to $500,000. Repeat offence: $5,000 to $1,000,000 (art. 15, CMM consolidation updated October 1, 2019).

These five cities are examples only. Our guides cover 44 US states and 10 Canadian provinces — see the By State directory.

How to Find Your Local Requirements

1
Contact your local POTW or water authority
Search "[your city] FOG program" or "[your city] grease trap ordinance". Many water authorities publish their FOG program contact and requirements on their website. Ask specifically for the "FOG ordinance" or "pretreatment program" document.
2
Request your FOG permit application
If your jurisdiction requires a discharge or interceptor permit, get the application from the water authority's pretreatment coordinator. Many cities have moved these online — search "[city name] grease interceptor permit application".
3
Ask a local grease trap service company
A grease trap service company that works in your area may also know local requirements, but confirm them with the authority.
4
Use the GTL FOG Compliance Checklist
GTL's free FOG Compliance Checklist helps you list common requirements to check against your local rules, so you can spot gaps before an inspection.
Non-Compliance Consequences

What Happens When Operators Don't Comply

Federal civil penalty cap: In Clean Water Act court cases, civil penalties can reach $68,445 per day per violation under 33 USC §1319(d), as adjusted for inflation in 40 CFR §19.4 for penalties assessed on or after January 8, 2025. State and local penalties are set separately.
Health department referral: FOG violations are sometimes referred to the local health department, which can trigger a separate inspection of your food service licence.

Common Questions About FOG Regulation

Are FOG regulations federal, state, or local?
Mostly local. In the United States, federal pretreatment rules (40 CFR Part 403) prohibit discharges that cause pass through or interference, and under 40 CFR §403.8 qualifying treatment works must run local pretreatment programs. The specific requirements — interceptor size, cleaning frequency, permits, documentation — are set by local ordinances, sometimes alongside state rules, and enforced by local wastewater authorities. In Canada, check the provincial or territorial and municipal rules that apply.
What is the 25% rule?
Many local programs use a 25% trigger, but what is measured, which devices it covers and how it is enforced vary. Seattle, for example, limits food and FOG buildup to 25% of an interceptor when manufacturer specifications are not available, and Connecticut's general permit, for outdoor in-ground interceptors, uses 25% of operating depth or service every three months, whichever comes first. It is not a federal rule. Check the rule that applies to your kitchen.
How do I find my local FOG ordinance?
Start with your local Publicly Owned Treatment Works (POTW) — the municipal or regional wastewater authority that physically receives your discharge. Many POTWs publish a pretreatment program page with the operative ordinance, permit application, and fact sheet. If your city is small, the program may be administered at the county or regional district level instead. Your plumbing inspector or local health department can also point you to the right office if the POTW does not publish online.
What records do I need to keep?
Keep pumping manifests, hauler receipts, and any monitoring or sampling records, and be ready to show them during an inspection. Retention periods are set by local rules and vary: Chandler, Arizona requires food service establishments to keep records on site for three years, while Connecticut's general permit requires five. Separately, industrial users subject to federal pretreatment reporting must keep monitoring records for at least 3 years, longer during unresolved litigation or when the regulator asks (40 CFR §403.12(o)(2)).

FOG Regulations by State and Province

Click any state or province below for its regulations guide and local service providers. Guides are available for 44 US states and 10 Canadian provinces.

United States — Southwest
GTL Tools Built for FOG Compliance

Free tools to help you plan for local FOG requirements — no signup required.

Find a FOG Compliance Contractor

Listings are compiled from public business information and each company's own website. Find grease trap contractors in your area — direct contact, no referral fees.

1,905+ grease trap contractors · 50 US states + 8 Canadian provinces · No signup required

Grease Trap Locator Editorial Team
Author: Grease Trap Locator Editorial Team

The Grease Trap Locator editorial team covers FOG compliance, grease trap maintenance, and commercial kitchen regulations across the US and Canada. Our guides are written for restaurant owners, facility managers, and food service operators who need practical, accurate information without the fluff.

Need Grease Trap Service?

Find local contractors who handle cleaning, pumping, and FOG compliance — in your area.

Find a Contractor
In This Article

Request Quotes from Local Grease Trap Pros

Tell us what you need. We review the request and may look for up to 3 available contractors within 75 miles. A match or response is not guaranteed.

Takes about a minute. We share your details only with contractors matched to your request.

We review every request before it goes out, so replies aren't instant. Response times depend on contractor availability in your area.

Request Quotes →